Large circular rope winding machine is a BOYAN industrial platform for winding or wrapping compatible decorative braided structures around dog-leash rope, hemp rope and related rope products. The verified reference lists a machine weight of 118.8 kg, a motor as the core component and overall dimensions of 1260 × 500 × 560 mm. The source title specifically describes winding various braided knots onto dog rope and hemp rope.
The exact job must be defined before configuration. “Circular winding” may mean wrapping a decorative cord around a rope section, building a ring-shaped feature, covering a joint or applying a repeated knot structure. Send the base rope, winding material, finished sample, dimensions and cycle video to yangle990706@gmail.com. BOYAN will separate confirmed standard functions from tooling and automation that require a trial.
Large Circular Rope Winding Machine: Quick Selection Guide
A large circular rope winding machine may fit a project where a defined rope or leash is held while another material is wound around it in a repeatable pattern. The reference confirms a motor-driven machine and the named dog-rope/hemp-rope application. It does not publish PLC, servo, touchscreen, automatic feed, tension control, rope range, winding speed or output.
- Reference model description: large ring/circular winding machine.
- Machine weight: 118.8 kg.
- Machine size: 1260 × 500 × 560 mm.
- Core component: motor.
- Named products: dog rope or leash and hemp rope with braided-knot winding.
- Open engineering fields: rope size, pattern, fixtures, tension, speed, controls, electrical input and cycle.
The correct acceptance target is a finished sample with measurable coverage, spacing, pull behavior and appearance. A general claim such as “precision circular winding” does not replace those criteria.
Verified Specification and Packing Conflict
| Item | Available reference | BOYAN confirmation |
|---|---|---|
| Model description | Large ring/circular winding machine | Final model and nameplate |
| Machine weight | 118.8 kg | Net weight of ordered build |
| Machine size | 1260 × 500 × 560 mm | Approved outline and working clearances |
| Core component | Motor | Motor rating, drive and control arrangement |
| Source application | Braided-knot winding on dog rope and hemp rope | Approved product, material and pattern |
| Package dimension field | 132 × 560 × 69 cm | Rejected as inconsistent; corrected packing size required |
| Package gross weight | 150.8 kg | Final shipping weight and packing list |
| Rope and winding range | Not published | Minimum/maximum diameters and sample result |
| Speed, tension and output | Not published | Measurable test conditions |
| Electrical input | Not published | Voltage, phase, frequency and installed power |
The package dimension field contains 560 cm, which is inconsistent with a machine width of 500 mm and is likely a source-data or unit-entry error. BOYAN will not use it for freight planning. A corrected packing drawing and verified gross weight must be issued before shipment.
Define the Base Rope and Winding Material
A rope product normally includes at least two material roles: the base rope or leash and the cord, thread or knot structure applied around it. Describe each separately. Provide fiber or polymer, construction, diameter, braid, coating, stiffness, surface texture, elasticity and color. If hardware such as a hook, ring, buckle or handle is attached, include its drawing and position.
The source title names dog rope and hemp rope. It does not confirm cotton, nylon, polypropylene, marine safety rope or every braided cord. A large circular rope winding machine can be evaluated for other materials only after sample review. Abrasive, stiff, elastic, coated or irregular rope may require different guides, clamps or drive settings.
- Base rope diameter, construction and length.
- Wrapping material diameter, construction and supply format.
- Minimum bend radius and allowable compression.
- Surface marks, fuzzing or color transfer that are unacceptable.
- Hardware, joints, splices and enlarged sections.
- Representative accepted and rejected finished samples.
Pattern, Coverage and Decorative Knot Requirements
Provide a drawing or sample showing where winding starts and ends, coverage length, wrap count, pitch, overlap, gap, color sequence and direction. If the product includes a decorative knot, explain whether the machine forms the knot or winds a prepared braided element around the rope. The source title does not describe a knot-forming mechanism.
A large circular rope winding machine may need product-specific guides and fixtures to keep the base rope aligned while the wrapping material moves around it. Pattern consistency depends on rope diameter, movement, material tension and control sequence. The verified record does not identify the number of axes or a servo arrangement.
Appearance criteria should include allowable exposed base rope, spacing variation, crossover, twist, loose ends and surface damage. If pull strength or joint security matters, define a mechanical test in addition to visual inspection.
Workholding and Product Length
Dog leashes and rope products may be long, flexible and fitted with hardware. The machine must hold the working section without tangling the remaining length or damaging clips and rings. Provide total product length, working-zone length, hardware dimensions and the location of the wrapped feature.
Clamping force should retain the product while avoiding flattening or marking. A braided hemp rope may tolerate different contact pressure from a coated pet leash. If several diameters are required, specify the full range and changeover method.
The 1260 × 500 × 560 mm machine size does not prove maximum product length or rope diameter. BOYAN will check supports, fixtures and operator clearance from the actual product.
Tension and Material Handling
The legacy page claimed uniform tension, but the reference does not identify a tensioner, sensor, control range or tolerance. Tension affects coverage, tightness, appearance and damage. Buyers should state the desired finished feel and, when measurable, a target tension and test location.
Wrapping material can loosen when the cycle stops or when the diameter changes around a joint. The trial should observe start anchoring, running tension, stop behavior and end securing. If automatic cut, tie, heat seal or adhesive application is needed, specify it; none is confirmed by the available record.
A large circular rope winding machine should be tuned with production material. Substituting a smooth test cord may hide problems that appear with fuzzy hemp, elastic braid or coated leash material.
Five Applications to Evaluate
1. Dog Leash Decorative Wrapping
The source title directly supports dog-rope or leash work. Provide leash construction, hardware, wrapped-zone location, pattern and pull requirements.
2. Hemp Rope Knot Wrapping
The machine can be evaluated for hemp-rope products where abrasive fibers, diameter variation and fuzzing are included in the sample test.
3. Handle and Joint Coverage
A large circular rope winding machine may wrap a defined section around a handle, splice or joint when geometry and securing method are clear. This requires product-specific tooling.
4. Decorative Braided Cord Products
Previously braided cord can be applied around a compatible base. Integrated braiding is not assumed unless the final machine specification includes it.
5. Custom Rope Assemblies
Other flexible rope assemblies can be reviewed from drawings, samples and mechanical requirements. Outdoor or safety-critical claims require separate testing and compliance evidence.
Automation Boundary and Cycle Definition
Convert “automatic” into a step-by-step responsibility list. Does the operator load the leash, anchor the wrapping material, start the cycle, cut the end, secure the knot and unload the product? Does the machine index between multiple wrapped zones? The source record does not answer these questions.
For each cycle step, mark manual, automatic or external. If feeding, cutting, tying, bonding or discharge is required, describe incoming orientation and acceptable finished condition. Sensors should be defined for missing product, material break, jam and incomplete winding.
Output must include operator time. The winding motion may be fast while loading hardware or securing ends controls the real cycle. A representative trial gives a better basis for selecting the large circular rope winding machine.
Speed, Output and Quality
No numerical winding speed or production rate is published. Working rate depends on base-rope diameter, wrap length, pattern, material supply, hardware, anchoring, finishing and operator tasks. BOYAN will not publish an invented pieces-per-hour figure.
Provide present cycle time, target output, shift plan and lot size. During testing, record stable cycles, material breaks, loose wraps, cosmetic defects and rework. The accepted speed is the rate that consistently meets quality criteria.
If the rope is safety-critical or load-bearing, the machine cycle alone does not certify the finished product. The buyer should define applicable strength tests, standards and traceability for the completed assembly.
Electrical, Controls and Integration
The verified source identifies a motor only. PLC, servo drive, touchscreen and constant-tension control in the old page are unsupported and have been removed. The proposal will state the actual motor, drive, controls and destination electrical supply.
If recipes, counters, password levels, fault history, barcode selection or line signals are required, list them. For upstream or downstream integration, provide start, ready, fault, safety and material-transfer interfaces. A standalone motorized winder should not be assumed to include factory-network functions.
BOYAN will confirm voltage, phase, frequency, installed power, enclosure and documentation for the selected large circular rope winding machine.
Safety and Risk Assessment
Rotating winding mechanisms, clamps, rope and hardware can create entanglement, impact and pinch hazards. Long flexible products can whip or catch if not controlled. Suitable guarding, emergency stops, safe setup procedures, isolation and training are required.
The risk assessment should cover loading, threading, anchoring, automatic winding, jam clearing, end finishing, unloading and maintenance. General principles are available from the OSHA machine-guarding guidance, while local laws and plant standards govern the final installation.
Never hold a rotating rope by hand or reach across a winding zone. Hooks and metal hardware can become projectiles. The workholding and guarding design must cover the maximum product and speed.
Recommended Sample Trial
- Approve the product: identify base rope, wrapping material, hardware and finished sample.
- Define the pattern: mark start, end, coverage, pitch, overlap and securing method.
- Set acceptance: agree visual, dimensional and mechanical criteria.
- Install tooling: verify clamping, supports, clearance and guard coverage.
- Run slowly: observe anchoring, tracking, material rubbing and product movement.
- Increase rate: tune motion while maintaining pattern and product condition.
- Finish the ends: demonstrate the agreed manual or automatic method.
- Inspect and test: check appearance, dimensions, unwind or pull requirements.
- Repeat: run multiple cycles and a representative changeover.
Retain accepted samples and parameter records. Test minimum and maximum rope sizes when the product range is broad.
Factory Acceptance Checklist
- Machine weight, size, motor and ordered controls match approved documents.
- Destination voltage, frequency, power and protective devices are verified.
- Product fixtures fit the approved leash or rope range.
- Manual and automatic steps match the written cycle.
- Guards, emergency stops and restart behavior are demonstrated.
- The buyer’s base rope and wrapping material complete repeated cycles.
- Pattern, coverage, surface condition and end security meet criteria.
- Cycle time, operator tasks, rejects and rework are recorded.
- Changeover and normal fault recovery are demonstrated.
- Manuals, drawings, parts and open actions are listed.
- Corrected packing dimensions and final gross weight are recorded.
The FAT is the measurable definition of the ordered large circular rope winding machine.
Information Needed for a Proposal
- Base rope or leash construction, diameter, length and sample.
- Wrapping material construction, size, supply package and sample.
- Hardware drawings and wrapped-zone location.
- Finished pattern, coverage, colors, start/end and securing method.
- Required manual and automatic cycle steps.
- Target output, shifts, batch size and changeover frequency.
- Visual, dimensional, pull and durability acceptance criteria.
- Voltage, phase, frequency, destination and plant standard.
- Guarding, controls, integration, documentation and commissioning needs.
- Delivery address and schedule.
Email these items to yangle990706@gmail.com. BOYAN will confirm process fit, tooling and test scope.
Compare Related BOYAN Machines
For circular hair-tie or ring products rather than long rope assemblies, review the fully automatic ring winding machine. For multi-strand wire handling, review the 8 axis winding machine. Each platform addresses a different product geometry.
Browse the BOYAN winding machines category for the complete equipment group.
Use our winding machine selection guide to compare control, material, package, speed, tension and application data before requesting a configuration.
Frequently Asked Questions
What rope materials are confirmed?
The source title names dog rope and hemp rope. Other materials require drawings, data and samples; no universal material list is claimed.
Does the machine make braided knots?
The source says braided knots can be wound onto rope, but it does not describe a knot-forming or braiding mechanism. The exact cycle must be confirmed from the finished sample.
What rope diameter range is supported?
No minimum or maximum diameter is published. Provide the full range for tooling and clearance review.
Does it include PLC and servo control?
The verified record identifies a motor only. PLC, servo and touchscreen must be confirmed in the final technical proposal if required.
What is the production speed?
No numerical speed or output is published. Rate is tested with the actual rope, pattern, hardware and finishing steps.
Are the package dimensions 132 × 560 × 69 cm?
That field conflicts with the machine size and is not suitable for freight planning. BOYAN will provide corrected packing data before shipment.
Can tooling be customized?
Yes, feasibility can be evaluated from product drawings and samples. Included tooling, cost, lead time and acceptance criteria are stated in writing.
Request a Rope-Winding Review
Send the base rope, wrapping material, hardware, finished sample, dimensions, cycle, target output and destination electrical standard. BOYAN will check whether this large platform is appropriate and define the tooling and acceptance test.
Contact yangle990706@gmail.com for a large circular rope winding machine proposal based on verifiable application data.
Reviews
There are no reviews yet.